Our pierced carved wood molding is hand carved in deep relief from premium selected hardwood. Wood molding sold in 2 feet lengths with an innovative wood dowel system for creating a continuous run of multiple pieces

wood dowel connector - DW1



2 wood dowel connectors included with each piece of molding purchased

Installation of our pierced wood molding is very easy:

1. Apply wood glue to both ends of wooden dowels.
2. Insert dowels into predrilled holes on either end of the two pieces to be joined
3. Space pieces of wood molding proportioned to design repeat

The dowels blend into the pierced pattern of carved wood molding and giving you a consisted uninterrupted look. Holes on either side of the wood molding can be easily plugged by gluing dowels in place, than cutting to feet and sending flush for a seamless look. This wood molding comes finely sanded, ready to accept stain or paint.

The elegant design of the Maryland pierced carved wood molding features gracefully scrolled acanthus leafs with stylized acanthus center. We have a wide variety of hand carved wood products that can compliment this carved wood molding:

Acanthus hard wood drapery brackets, acanthus leaf wood corbels with egg and dart trim

center wood carvings with leaf motif, corner wood carvings with leaf motif

wood plaques with acanthus leaf motif