Panel Molding

The instillation of the panel molding is as easy as thinking of your design. Before installing the wood panel molding, you should either pre-stain it or prime it. You can use liquid nails or adhesive and should be reinforced with molding nails by being nailed to the studs within the walls. After you are done installing, you should putty the holes from the nails and then sand the wood putty down to make everything really smooth. Then, you are ready to paint or stain it. The way to make sure that there would be no excess on the wall: you should use painter’s tape on the wall right by the molding. Make sure to only apply thin coats and apply as many as you need to achieve the look you want. Applying thin coats eliminates bubbles, drips, and makes the molding dry faster. You will love the final design and the creative process to get to the final look.

Wood Panel Molding