|
panel molding CNCR3392 1-9/16"H x 3/4"P 8'00" panel molding list price: $ 29.00 your price: $ 20.00 |
|
|
Framing paper in decorative Classic panel molding adds a luxe look and architecture to your home... create architecture with wall panels
Classic I molding specifications
- outstanding quality molding made from high density polyurethane
- front surface of this molding has extra durable and smooth
- panel molding is pre-primed with water-based white paint
- lightweight, durable and easy to install using common woodworking tools
- metal dies were used for consistent quality and perfect part to part match for hassle free installation
- this molding has sharp, deep and highly defined design
- panel molding can be finished with any quality paints
Classic I Panel Molding
Decorative Molding Corners and Inserts |
|||
 |
Classic Molding Corner II - CNPM10366 5-3/4"H x 5-3/4"W x 3/4"D list price: $ 10.00 your price: $ 9.00 |
|
Decorative Classic Molding Corner III - CNPM10178 7-7/8"H x 7-7/8"W x 3/4" list price: $ 15.00 your price: $ 12.00 |
|
Classic Molding Corner I - CNPM10277 7-7/8"H x 7-7/8"W x 3/4"D list price: $ 12.00 your price: $ 10.00 |
 |
Classic Molding Insert - CNPM10400 4-1/8"H x 9-5/8"W x 3/4"P projection of the ornamented area: 1-9/16 list price: $ 12.00 your price: $ 10.00 |
Classic I Panel Molding Installed |
||
 |
 |
Classic I molding shown installed as a chair-rail in combination with Marietta baseboard |
  |
Shock resilient Classic I panel molding with egg-and-dart panel molding and Marietta baseboard |
|
  |
Door trim created with Classic I shock resilient molding and egg-and-dart panel molding |
|
  |
Ceiling design features: Classic I panel molding with decorative corners and inserts in combination with
Florence companion molding |
|
  |
Wall panels created with Classic I shock resilient molding + Huntington panel molding as a top rail and Marietta baseboard on the bottom; On the ceiling - Santa-Ana crown molding for indirect lighting and San-Antonio ceiling medallions |
|
 Architectural products used:
Large Acanthus crown molding with
Classic I panel molding below; |
  |
|
Molding Adhesive |
|||
 |
Adhesive for Molding |
 |
Adhesive for shock resilient molding |
|
Adefix P5 - AT3 adhesive 10 oz. tube Adhesive-filler for molding installation list price: $ 13.00 your price: $ 10.00 |
Adefix - FW adhesive 10 oz. tube An extra strong adhesive for molding made of High Definition Polymer System list price: $ 15.60 your price: $ 12.00 |
||
DECORATIVE PANEL MOLDING