|
panel molding NZ10 1-5/8"H x 6/8"P 6'6"L molding list price: $ 22.50 your price: $ 18.00 |
|
shock resilient molding NWL1 8'00"L molding list price: $ 26.00 your price: $ 20.00 |
|
flexible molding NZ10FL 6'6"L molding list price: $ 52.00 your price: $ 40.00 |
---
---
Pacifica shock resilient molding specifications
- outstanding quality panel molding manufactured out of unique High Definition Polymer System (HDPS),
environmentally friendly material is hypoallergenic and fully recyclable, no CFC, no PVC, no
formaldehydes
- water and humidity resistant
- maximum long term protection against scratches and dents
- primed to allow perfection in painting
- has tough, extremely smooth surface
- back of the molding is perforated for better adhesion
- complimentary flexible molding available
- metal dies used for consistent quality and perfect part to part match for hassle free installation
---
molding's moisture resilient qualities
Pacifica Panel Molding
Decorative Molding Corners and Inserts |
|||
 |
small molding corner - NZ103 5-3/4"H x 5-3/4"W list price: $ 11.25 your price: $ 9.00 |
 |
decorative molding corner - NZ101 7-7/8"H x 7-7/8"W list price: $ 12.50 your price: $ 10.00 |
 |
large molding corner - NZ102 7-7/8"H x 7-7/8"W list price: $ 12.50 your price: $ 10.00 |
 |
decorative insert - NZ104 4-1/8"H x 1-5/8"P x 10"L list price: $ 12.50 your price: $ 10.00 |
Pacifica Panel Molding Installed |
||
 |
 |
Pacifica molding shown installed as a chair-rail in combination with Marietta baseboard |
  |
Shock resilient Pacifica panel molding with egg-and-dart panel molding and Marietta baseboard |
|
  |
Door trim created with Pacifica shock resilient molding and egg-and-dart panel molding |
|
  |
Ceiling design features: Pacifica panel molding with decorative corners and inserts in combination with
Florence companion molding |
|
  |
Wall panels created with Pacifica shock resilient molding + Huntington panel molding as a top rail and Marietta baseboard on the bottom; On the ceiling - Santa-Ana crown molding for indirect lighting and San-Antonio ceiling medallions |
|
 Architectural products used:
Austin crown molding with
Pacifica panel molding below; |
  |
|
Molding Adhesive |
|||
 |
Adhesive for Molding |
 |
Adhesive for shock resilient molding |
|
Adefix P5 - AT3 adhesive 10 oz. tube Adhesive-filler for molding installation list price: $ 13.00 your price: $ 10.00 |
Adefix - FW adhesive 10 oz. tube An extra strong adhesive for molding made of High Definition Polymer System list price: $ 15.60 your price: $ 12.00 |
||
DECORATIVE PANEL MOLDING